Products

GB/T 16584 • ISO6502 • HG/T 3709-2003 Rotorless Rheometer Product description: Rotorless Rheometer is an instrument which is able to get the cure characteristic curve and parameters of rubber materials, by measuring the applied torque of rubber materials to the reciprocating swing die body. YN41096 Rotorless Rheometer is with good repeatability and stability. Under conditions of 160 ℃, 12mins; use the properly mixed rubber sample to do the test 4 times continuously, the gap of T90 is only a few seconds. Powerful database capabilities, which is able to support a number of curves drawing to storage, output and print in the same interface. Scorching time optional (Ts1, Ts2, T10, T20 .... T90), measuring range selectable, sample curve drawing, screen data capture etc. Standards: • GB/T 16584 • ISO6502 • HG/T 3709-2003 Technical parameters: • Temperature range: room temperature～200℃ • Heating up rate: ±0.5℃ • Temperature display resolution: 0.1℃ • Heating rate: room temperature--200℃, about 10 mins achieves the balance • Torque range: 0～20N.m • Rotor swing angle: ±0.5° • Swing frequency: 1.67Hz (100r/min) Specifications: • Overall dimensions: 530mm×560mm×1020mm • Power supply: AC 220V 50/60Hz 5A go to product group+
GB/T 1232 • ISO289, ISO667 • HG/T 3242-2005 Computer-based Mooney Viscometer Product description: Computer-based mooney viscometer is used to test the viscosity, scorch and vulcanization index, etc. of the raw rubber or rubber compound, with microcomputer control, digital display, and automatic calibration, which is an ideal laboratory instrument for rubber industry and scientific research units. It is adopted with imported intelligent digital temperature control, easy to adjust setting and has wide range of temperature control; A control computer working with the interface board used for data collection, holding, processing and printing of test results and curve. Software platform can be Windows 98/me/NT/XP, etc. A Visual graphics software window interface, makes the digital processing more accurate and the operation simple, flexible and convenient. High reliability, fully embodies the characteristics of highly automated Standards: • GB/T 1232 • ISO289, ISO667 • HG/T 3242-2005 Technical parameters: • Temperature range: room temperature～200℃ • Heating up rate: ±0.5℃ • Mooney value measuring range: 0～200 mooney points • Mooney value resolution: 0.1 mooney point • Mooney value measuring accuracy: ±0.5 mooney point • Rotor rate: 2±0.02 r Specifications: • Overall dimensions: 530mm×560mm×1040mm • Power supply: AC 220V 50/60Hz 5A go to product group+
Melting Index Apparatus/Melt Flow Rate Tester (Touch screen) Product description: Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) Tester (touch screen) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials; which is adopted microprocessor control and integration, digital measurement and control technology, programmed test process settings in line with test standard, high heating rate, high constant temperature accuracy; after filling materials, it can restore a constant temperature quickly; English color and crystal display, voice prompts, touch-screen operation, convenient and easy to understand Standards: • GB/T3682-2000 • ISO1133-97, ASTM1238 Technical parameters: • Temperature control range: room temperature～450 ℃ • Temperature control precision: ±0.2 ℃ • Display resolution: 0.1 ℃ • Max power consumption: ≤500 W • Temperature recovery time: 4 min • Charging barrel parameter: inner bore: Φ9.55±0.025mm • Piston parameter: piston head Φ=9.475±0.015mm • Piston head length: H=6.35±0.1mm • Mouth mold configuration: excluding hole Φ=2.095±0.005mm • Mouth mold configuration: Φ2.095±0.005/Φ1.18±0.01mm • Weight parameter: 325g, 875g, 960g, 1200 g, 1640g(including pressure feeding rod) extra weights are available for user’s demand • Weight accuracy: ±0.5％ Specifications: • Overall dimensions: 500mm×320mm×600mm • Power supply: AC 220V 50/60Hz 3A • Volumetric method: (optional for users) go to product group+
Rubber and Plastic Low-temperature (impact) Embrittlement Tester Product description: Rubber and plastic low-temperature (impact) embrittlement tester is used to test the vulcanized rubber’s max temperature (brittleness temperature) under specified condition appearing damage by impact. Enable to make comparative identification of usability for plastics and other elastic materials at low temperature, and measure the pros and cons for brittleness temperature and low temperature performance of different rubber materials or different formulations of vulcanized rubber. Therefore, it is indispensable for quality inspection of scientific R&D materials and finished products, and quality control during production process, etc. Standards: • GB/T 5470-2008 Technical parameters: • Test temperature: -80℃, -70℃, -40℃～room temperature (optional for users) • Impact rate: 2m/s ±0.2m/s • Impact mode: Manual • After the temperature is constant, temperature fluctuation in 3 mins of the test: ＜±0.5℃ • Distance between the impactor head lateral and grippers: 2.0±0.1mm • Cold well volume: 7L Specifications: • Overall dimensions: 900mm×530mm×950mm • Power supply: AC 220V 50/60Hz 5A go to product group+
Rubber and Plastic Low-temperature (impact) Embrittlement Tester Product description: Rubber and plastic low-temperature (impact) embrittlement tester is used to test the vulcanized rubber’s max temperature (brittleness temperature) under specified condition appearing damage by impact. Enable to make comparative identification of usability for plastics and other elastic materials at low temperature, and measure the pros and cons for brittleness temperature and low temperature performance of different rubber materials or different formulations of vulcanized rubber. Therefore, it is indispensable for quality inspection of scientific R&D materials and finished products, and quality control during production process, etc. Standards: • GB/T 1682-2014 Technical parameters: • Test temperature: -70℃, -40℃～room temperature (optional for users) • Impact load: 113 ± 5N • Impact power: pneumatic • After the temperature is constant, temperature fluctuation in 3 mins of the test: ＜±0.5℃ • Distance between the impactor center and end face of the gripper: 11±0.5mm • Distance between the impactor head and specimen: 25±1mm • Cold well volume: 7L Specifications: • Overall dimensions: 900mm×530mm×950mm • Power supply: AC 220V 50/60Hz 5A go to product group+
Power-driven Low Temperature Elongation Test Equipment Product description: Wire and cable power-driven low temperature elongation test equipment is applicable to polymer materials, wire and cable, rubber, plastic and other insulating sheath tensile test at 0 to -70℃ environment. The stretching device consists of motor, transmission parts, Specimen chuck, sensors and other components Standard: • GB/T 2951.14-2008 Technical parameters: • Electronic control cabinet: it consists of three groups of displacement indicators, stretching indicator, reset and speed regulating system(the stretching speed is preset before leaving factory) • The displacement display displays the displacement length accurately, when the specimen is being stretched, it displays the displacement automatically, when the specimen is stretched to break, the displacement figure stops at the very moment of being broken, and the unit is mm • Motor power: 120W, placed outside of the low temperature chamber • Max tensile strength: 220mm • Tensile speed: 20～30mm/min • Chuck type: Non-self-tightening type • Specimen model: No. Ⅰ, Ⅱ dumbbell specimen Specifications: • Overall dimensions: stretching device: 390mm×245mm×280mm control cabinet: 440mm×400mm×200mm • Power supply: AC 220V 50/60Hz 2A • This tester is used in conjunction with the low temperature chamber go to product group+
Home Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Next Last

Search Keywords

This website stores cookies on your computer. These cookies are used to improve your website experience and provide more personalized services to you, both on this website and through other media. To find out more about the cookies we use, see our Privacy Policy.
We won't track your information when you visit our site. But in order to comply with your preferences, we'll have to use just one tiny cookie so that you're not asked to make this choice again.
Accept
Decline